Instructions / Assembly

Assembly Instructions 2/3
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 The unit must be level to work properly. Use the included adjustable levelers to level.
 Keep Wrench as the nuts may need to be tightened in the future.
Flat Washer
Spring Washer
Nut
Nut Cap
Nut Cap
Nut
Spring Washer
Flat Washer
Bolt
B
B
B
C
C
C
C
STEP 1
Attach Legs (B) to Side Frames (C) with Flat Washers, Spring Washers and Nuts, tightening nuts
only halfway. (See Figures 1 and 2)
Place Top (A) upside down on a soft cloth.
Insert Bolts into pre-drilled holes in Top (A), then tighten. (See Figure 3)
Attach unit to Top (A) with Flat Washers, Spring Washers and Nuts,
tightening nuts only halfway.
Tighten all Nuts.
Cover all Nuts with Nut Caps.
Figure 1
B
A
Figure 2
Figure 3