Use and Care Manual

Assembly Instructions

STEP 1

Attach Back (A) to Seat (B) with Round

Flat Washers (large), Spring Washers

(large), Nuts (large) and Nut Caps (large).

STEP 2

Attach Connector (F) to unit with Bolts, Flat Washers,

Spring Washers (large), Nuts (large) and Nut Caps (large).

(See Figure 1)

Place unit onto Base (E).

STEP 3

Attach Arms (C) and (D) to unit with

Tapered Bolts (long), Tapered Bolts (short),

Round Flat Washers (small),

Spring Washers (small), Nuts (small) and

Nut Caps (small).

Flat Washer

Spring Washer (large)

Round Flat Washer (large)

Round Flat Washer

(small)

Spring Washer

(small)

Tapered Bolt (short)

Tapered Bolt (long)

Nut (large)

Nut (small)

Nut Cap (large)

Bolt

Nut Cap (small)

Figure 1

IMPORTANT

* Please keep Key Wrench in a safe place as you may need to tighten up the Nuts in the future.

* Use a soft cloth between these parts and the ﬂ oor.

* Do not use power tools to assemble and do not over tighten the bolts and nuts.

* Do not tighten up all the bolts and nuts until each part is properly assembled.