Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsDining Room SetsBrentwood Black Round Dining Set Seats 4

Hardware List

Part List

5 -80581

Chair

IMPORTANT

Seat

1 pc.

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Leg

1 pc.

Leg

1 pc.

Back Frame

1 pc.

styles Customer Service: www.homestylesfurniture.com,home

servicedesk@homestylesfurniture.com,

888-680-7460

Mx088

Head Cap Bolt (long)

8 pcs. (+1 extra)

Mx485

Head Cap Bolt

2 pcs. (+1 extra)

Flat Washer

1 pcs. (+1 extra)0

Spring Washer

1 pcs. (+1 extra)0

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

Summary of content (7 pages)

PAGE 1
5581-80 Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Seat 1 pc. B. Leg 1 pc. C. Leg 1 pc. D. Back Frame 1 pc. Hardware List Hex Wrench 1 pc. Flat Washer 10 pcs. (+1 extra) Spring Washer 10 pcs. (+1 extra) Small Hex Wrench 1 pc.
PAGE 2
Assembly Instructions 2/2 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench as the bolts may need to be tightened in the future. Head Cap Bolt (long) Spring Washer Flat Washer C A B STEP 1 Place Seat (A) upside down on a soft cloth.
PAGE 3
Assembly Instructions 3/3 Head Cap Bolt (long) Spring Washer Flat Washer Head Cap Bolt Spring Washer Flat Washer D STEP 2 Attach Back Frame (D) to unit with Flat Washers, Spring Washers, Head Cap Bolts and Head Cap Bolts (long), tightening bolts only halfway. (See Figures 2 and 3) Tighten all bolts used in Steps 1 and 2.
PAGE 4
5581-32 Round Dining Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. B. Leg 4 pcs. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. Spring Washer 8 pcs. (+1 extra) Flat Washer 8 pcs.
PAGE 5
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench as the bolts may need to be tightened in the future. Head Cap Bolt Spring Washer Flat Washer B B B B A STEP 1 Place Top (A) upside down on a soft cloth. Attach Legs (B) to Top (A) with Flat Washers, Spring Washers and Head Cap Bolts, tightening bolts only halfway.
PAGE 6
Assembly Instructions 3/3 STEP 2 Turn unit over to its upright position. Level unit by adjusting the adjustable levelers on bottom of legs.
PAGE 7
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.