Use and Care Manual

ManualsBrandsHOMESTYLES ManualsOutdoor Bistro TablesLarimer Blue and Black Round Metal Outdoor Bistro Table

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Hardware List

Part List

Tool(s) required for assembly: Level

Wing Nut

4 pcs. (+1 extra)

Flat Washer

4 pcs. (+1 extra)

Top

1 pc.

20 05600 0034

Bistro Table

Care Instructions

The tile top contains natural stone materials with naturally occurring fissures and

cavities. A sealer has been applied to reduce the absorption of liquids. Even with

sealer applied, liquids can still absorb into the surface causing permanent stains

and can damage the top by cracking the tiles if the absorbed liquid freezes.

• Never allow liquids to remain on the top.

• Apply a stone sealer to the top annually.

• Store inside in freezing weather.

Leg

1 pc.

Leg

1 pc.

Summary of content (4 pages)

PAGE 1
20 05600 0034 Bistro Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. B. Leg 1 pc. C. Leg 1 pc. Hardware List Wing Nut 4 pcs. (+1 extra) Flat Washer 4 pcs.
PAGE 2
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. The unit must be level to work properly. Use the included adjustable levelers to level. C B Wing Nut Flat Washer A STEP 1 Place Top (A) upside down on a soft cloth. Attach Leg (B) to Top (A) with Flat Washers and Wing Nuts, tightening Wing Nuts only halfway. (See Figure 1) Attach Leg (C) to Top (A) and Leg (B) with Flat Washers and Wing Nuts, tightening Wing Nuts only halfway. Tighten all Wing Nuts.
PAGE 3
Assembly Instructions 3/3 STEP 2 Turn table over to its upright position. Level table by adjusting the adjustable levelers on bottom of legs.
PAGE 4
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.