Use and Care Manual

Assembly Instructions 2/4
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Attach Stretchers (G) to Legs (E) and (F).
E
E
F
I
G
G
Figure 1
Head Cap Bolt (50mm)
STEP 2
Attach one leg unit to Base (I)
with Head Cap Bolts (50mm).
(see Figure 1)
Attach Stretchers (H) to base unit.
Attach the other leg unit to base
unit with Head Cap Bolts (50mm).
H
F
H