Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsOutdoor Bistro TablesDu Jour Black Round Metal Outdoor/Indoor Bistro Table with Gray Concrete Tile Top

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

Base

1 pc.

M8x20

Bolt

4 pcs.(+1 extra)

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

Seat

1 pc.

Carton 20 05611 0CUS is also needed for assembly.

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

20 05611 0080

Chair

Summary of content (12 pages)

PAGE 1
20 05611 0080 Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Seat 1 pc. B. Base 1 pc. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. M8x20 Bolt 4 pcs.(+1 extra) Carton 20 05611 0CUS is also needed for assembly.
PAGE 2
Assembly Instructions 2/2 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench as the bolts may need to be tightened in the future. STEP 1 Attach Seat (A) to Base (B) with Head Cap Bolts, tightening bolts only halfway. (See Figure 1) Head Cap Bolt Tighten all Bolts. A Figure 1 B C STEP 2 Place Cushion (C) onto seat.
PAGE 3
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
PAGE 4
20 05611 0034 Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. B. Support 1 pc. C. Leg 3 pcs. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. Washer 6 pcs. (+1 extra) M6x15 Bolt 12 pcs.
PAGE 5
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench as the bolts may need to be tightened in the future. STEP 1 Place Top (A) upside down on a soft cloth. C Attach Leg (C) to Top (A) with Washers and Head Cap Bolts, tightening bolts only halfway.
PAGE 6
Assembly Instructions 3/3 Head Cap Bolt Washer C STEP 3 Attach Leg (C) to unit with Washers and Head Cap Bolts, tightening bolts only halfway. Head Cap Bolt B STEP 4 Attach Support (B) to unit with Head Cap Bolts, tightening bolts only halfway. Tighten all bolts used in all steps.
PAGE 7
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
PAGE 8
20 05611 0CUS Cushion IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List C. Cushion 1 pc. For assembly see instructions in carton 20 05611 0080. Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.
PAGE 9
20 05612 0034 Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. B. Support 1 pc. C. Leg 3 pcs. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. Washer 6 pcs. (+1 extra) M6x15 Bolt 12 pcs.
PAGE 10
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench as the bolts may need to be tightened in the future. STEP 1 Place Top (A) upside down on a soft cloth. C Attach Leg (C) to Top (A) with Washers and Head Cap Bolts, tightening bolts only halfway.
PAGE 11
Assembly Instructions 3/3 Head Cap Bolt Washer C STEP 3 Attach Leg (C) to unit with Washers and Head Cap Bolts, tightening bolts only halfway. Head Cap Bolt B STEP 4 Attach Support (B) to unit with Head Cap Bolts, tightening bolts only halfway. Tighten all bolts used in all steps.
PAGE 12
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.