Instructions / Assembly

STEP 2
Attach Leg (C) to unit
with Washers and Head Cap Bolts,
tightening bolts only halfway.
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 Keep Hex Wrench as the bolts may need to be tightened in the future.
Washer
A
C
STEP 1
Place Top (A) upside down on a soft cloth.
Attach Leg (C) to Top (A) with Washers and
Head Cap Bolts, tightening bolts only halfway.
(See Figure 1)
Assembly Instructions 2/3
Head Cap Bolt
Figure 1
Washer
Head Cap Bolt
C