Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsOutdoor Bar FurnitureBali Hai Eucalyptus Shorea Wood Patio Bar Stool

Part List

Seat

1 Pc.

Leg

1 Pc.

Stretcher

1 Pc.

Stretcher

2 Pcs.

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

Tools required for assembly : Phillips screwdriver

M8x32

Wood Screw

6 Pcs. (+1 extra)

1 Pc.

M6x95

4 Pcs. (+1 extra)

Flat Washer

10 Pcs. (+1 extra)

Back Rest

1 Pc.

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

88 5662 89

Bar Stool

M6x45

Head Cap Bolt (short)

2 Pcs. (+1 extra)

Leg

1 Pc.

M6x55

Head Cap Bolt (middle)

4 Pcs. (+1 extra)

Head Cap Bolt (long)

Hex Wrench

Small Hex Wrench

1 Pc

Spring Washer

10 Pcs. (+1 extra)

Summary of content (3 pages)

PAGE 1
88 5662 89 Bar Stool IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List B. Seat 1 Pc. A. Back Rest 1 Pc. C. Leg 1 Pc. E. Stretcher 1 Pc. F. Stretcher 2 Pcs. D. Leg 1 Pc.
PAGE 2
Assembly Instructions 2/3 IMPORTANT * Do not tighten up all the screws until each part is properly assembled * You should keep Wrench in a safe place as you may need top tighten up the Head Cap Bolts in the future. * Use a soft cloth between these parts and the floor. STEP 1 Attach Seat (B) to Back Rest (A) with Head Cap Bolts (long), Head Cap Bolts (short), Spring Washers and Flat Washers. The Head Cap Bolts must be completely tightened using the Hex Wrench.
PAGE 3
Assembly Instructions 3/3 STEP 3 Attach Stretchers (F) and unit from Step 2 to unit from Step 1 with Wood Screws, Head Cap Bolts (middle), Spring washers and Flat Washers.