Installation Guide

ManualsBrandsHOMESTYLES ManualsDeck BoxesMaho 65.67 Gal. French Gray Outdoor Storage Deck Box

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

20 05664 0025

Deck Box

IMPORTANT

Bottom Panel

1 pc.

Seat

1 pc.

Front Panel

1 pc.

Back Panel

1 pc.

Side Panel

1 pc.

Side Panel

1 pc.

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

M6x30

Head Cap Bolt

4 pcs. (+1 extra)

M7x60

Assembly Screw

8 pcs. (+1 extra)

Steel Plate A

2 pcs.

Steel Plate B

2 pcs.

M3.5x12.5

Wood Screw

19 pcs. (+1 extra)

Summary of content (4 pages)

PAGE 1
20 05664 0025 Deck Box IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Seat 1 pc. B. Front Panel 1 pc. C. Back Panel 1 pc. D. Side Panel 1 pc. F. Bottom Panel 1 pc. E. Side Panel 1 pc. Hardware List M3.5x12.5 Wood Screw 19 pcs.
PAGE 2
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts and assembly screws until each part is properly assembled. Keep Hex Wrench as the bolts and assembly screws may need to be tightened in the future. Assembly Screw C E B D STEP 1 Attach Front Panel (B) and Back Panel (C) to Side Panel (D) with Assembly Screws. (See Figure 1) Attach Side Panel (E) to unit with Assembly Screws.
PAGE 3
Assembly Instructions 3/3 STEP 3 Attach Seat (A) to unit with Wood Screws. (See Figure 2) A Wood Screw Figure 2 Figure 3 Figure 4 Steel Plate B Wood Screw STEP 4 Attach Steel Plates A and B to unit with Wood Screws. (See Figures 3 and 4) Attach Supports to Steel Plates A and B.
PAGE 4
CARE INSTRUCTIONS Advisory Notes · · · · · · · Do not use power tools above 8 volts to assemble. Periodic structural checks of this furniture should be undertaken. Do not use if there are any doubts about its’ fitness for purpose. Exercise care so as to not trap fingers in any of the hinged parts of this furniture. Always use on firm level ground, ensuring that all legs remain in contact with the ground. Do not stand on a chair or sit or stand on any other item.