Installation Guide

Assembly Instructions 2/3
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts and assembly screws until each part is properly assembled.
 Keep Hex Wrench as the bolts and assembly screws may need to be tightened in the future.
STEP 1
Attach Front Panel (B) and Back Panel (C) to Side Panel (D) with Assembly Screws.
(See Figure 1)
Attach Side Panel (E) to unit with Assembly Screws.
STEP 2
Turn unit over to its upright position.
Attach Bottom Panel (F) to unit
with Head Cap Bolts.
F
E
D
B
C
Assembly Screw
Head Cap Bolt
Figure 1