Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsOutdoor Chaise LoungesSustain Gray Wood Outdoor Chaise Lounge Chair with Gray Cushions

5670-10

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Chair

Seat

1 pc.

Side

1 pc.

Side

1 pc.

Back

1 pc.

Seat Cushion

1 pc.

Back Cushion

1 pc.

styles Customer Service: www.homestylesfurniture.com,home

servicedesk@homestylesfurniture.com,

888-680-7460

Hardware List

Part List

Small

Hex Wrench

1 pc.

Hex Wrench

1 pc.

Spring Washer

8 pcs. (+1 extra)

M8x50

Head Cap Bolt (large)

4 pcs. (+1 extra)

M6x45

Head Cap Bolt

6 pcs. (+1 extra)

M6x30

Head Cap Bolt (short)

2 pcs. (+1 extra)

Flat Washer

8 pcs. (+1 extra)

Wood Plug

4 pcs. (+1 extra)

Summary of content (4 pages)

PAGE 1
5670-10 Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Seat 1 pc. B. Side 1 pc. C. Side 1 pc. D. Back 1 pc. E. Seat Cushion 1 pc. F. Back Cushion 1 pc. Hardware List Hex Wrench 1 pc. M6x30 Head Cap Bolt (short) 2 pcs.
PAGE 2
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench as the bolts may need to be tightened in the future. Head Cap Bolt Spring Washer Flat Washer B A C STEP 1 Attach Side (B) and (C) to Seat (A) with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway.
PAGE 3
Assembly Instructions 3/3 E Velcro STEP 3 Use velcro on Seat Cushion (E) to attach to unit. F Figure 3 Wood Plug STEP 4 Turn unit to its upright position. Slide Back Cushion (F) into position. Cover holes with Wood Plugs.
PAGE 4
CARE INSTRUCTIONS Advisory Notes · · · · · · · Do not use power tools above 8 volts to assemble. Periodic structural checks of this furniture should be undertaken. Do not use if there are any doubts about its fitness for purpose. Exercise care so as to not trap fingers in any of the hinged parts of this furniture. Always use on firm level ground, ensuring that all legs remain in contact with the ground. Do not stand on a chair or sit or stand on any other item. Do not let children play with this furniture.