Dining Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. = Part List NB D. Stretcher 2 pes. S ~ < Stretcher Hardware List A & M670 Maxima Mb oe Small Hex Wrench Hod Cop Bolt fling) Heed Cop Alt Hurd Cap Bolt short) Spring Washer Tp. 4 pes. {+1 extra) 16 pes.
( Assembly Instructions 2/6 ) IMPORTANT = Lie 3 soft cloth between these parts and the floor. = Da not use power tools above 8 volts to assemble, » Do not tighten all the bolts until each part is properly assembled, © The unit must be level to work properly. Use the included adjustable levelers to level.
( Assembly Instructions 3/6 ) STEP 2 Attach Stretchers (D} to Stretcher {C) with Dowels, Head Cap Bolts, Spring Washers and Flat Washers. Tighten Head Cap Bolts with Hex Wrench. {See Figure 2} Haas Cap Bait Hex Wrench Head Cap Baltic 8, Spring Washer Flat Washer Dowel yy Figure 2 STEP 3 Attach unit from Step 2 to unit from Step 1 with Head Cap Bolts (long) and Flat Washers. Je ee Head Cap Holt fang) . 4d Fit Washer Tighten Head Cap Bolts (long) 1 i with Hex Wrench.
( Assembly Instructions Head Cap Bolt ® | gr Flat Washer i Attach Head Cap Bolts and Flat Washers to unit.
( Assembly Instructions 6/6 ) STEP 6 Turn unit over to its upright position, Level unit by adjusting the adjustable levelers on bottom of unit. Note: Unit must be level to work properly.