Instructions / Assembly

Assembly Instructions 4/6

STEP 3

Insert Axle (H) into unit.

Orientate Wheels (G) so large hole in center of Wheels (G) is to outside of unit,

then attach Wheels (G) to unit with Head Cap Bolts (short), Spring Washers and Flat Washers,

tightening Head Cap Bolts only halfway. (See Figure 3)

Lock Axle (H) in place by inserting Short Bolts into per-drilled holes in unit, then tighten bolts.

(See Figure 4)

Head Cap Bolt (short)

Spring Washer

Flat Washer

Short Bolt

Large Hole

Figure 3

Figure 4

Large Hole