Instructions / Assembly

Assembly Instructions 2/3
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 The unit must be level to work properly. Use the included adjustable levelers to level.
 Keep Wrench as the bolts may need to be tightened in the future.
B
C
A
STEP 1
Place Side Frame (C) on a soft cloth.
Attach Back (A) and Seat (B) to Side Frame (C)
with Flat Washers, Spring Washers and Bolts,
tightening bolts only halfway.
(See Figure 1)
STEP 2
Place Side Frame (D) on a soft cloth.
Attach unit to Side Frame (D)
with Flat Washers, Spring Washers
and Bolts, tightening bolts only halfway.
Tighten all Bolts used in Steps 1 and 2.
Cover all Bolts with Caps.
Cap
Bolt
Spring Washer
Flat Washer
D
Figure 1
Cap
Bolt
Spring Washer
Flat Washer