Instructions / Assembly

Assembly Instructions 2/5
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
STEP 1
Attach (D) to Side (B) with Head Cap Bolts (short), Spring Washers and Flat Washers,Rail
tightening bolts only halfway. (See Figure 1)
Attach Seat (A) to unit with Head Cap Bolts, Spring Washers
and Flat Washers, tightening bolts only halfway.
Head Cap Bolt
Spring Washer
Flat Washer
Flat Washer
Spring Washer
Head Cap Bolt (short)
A
B
D