Manualshelf

Use and Care Manual

ManualsBrandsHOMESTYLES ManualsOutdoor Lounge ChairsPalm Springs Brown Stationary Wicker Rattan Outdoor Lounge Chair with Tan Cushion and End Table (3-Piece)
12345678910
Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Front (F), (G) and Back (H)Frame
to Side (C) with Head Cap Bolts, Spring Washers
and Flat Washers, tightening bolts only halfway.
(See Figure 1)
STEP 2
Attach withSeat (B) to unit
Head Cap Bolts, Spring Washers and
Flat Washers, tightening bolts only halfway.
Head Cap Bolt
Spring Washer
Flat Washer
Figure 1
C
F
G
H
Head Cap Bolt
Spring Washer
Flat Washer
B