Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsOutdoor Bar FurnitureBoca Raton Gray Wicker Outdoor Bar

Part List

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

6800-201

Sofa Table

Top

1 pc.

Base

1 pc.

Container

3 pcs.

Top

3 pcs.

Foot

4 pcs.

Small

Hex Wrench

1 pc.

Hex Wrench

1 pc.

Spring Washer

16 pcs. (+1 extra)

M6x35

Head Cap Bolt

16 pcs. (+1 extra)

Flat Washer

16 pcs. (+1 extra)

Plug

3 pcs.

styles Customer Service: www.homestylesfurniture.com,home

servicedesk@homestylesfurniture.com,

888-680-7460

Tool(s) required for assembly: Level

Hardware List

needed for assembly.Carton 6800-202 is also

Summary of content (8 pages)

PAGE 1
6800-201 Sofa Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. D. Top 3 pcs. C. Base 1 pc. F. Container 3 pcs. E. Foot 4 pcs. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. M6x35 Head Cap Bolt 16 pcs.
PAGE 2
Assembly Instructions 2/6 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future.
PAGE 3
Assembly Instructions 3/6 Flat Washer Spring Washer Head Cap Bolt B STEP 2 Attach Side (B) to unit with Head Cap Bolts, Spring Washers and Flat Washers, tightening bolts only halfway. Tighten all bolts used in Steps 1 and 2.
PAGE 4
Assembly Instructions 4/6 Head Cap Bolt Spring Washer Flat Washer E E E E STEP 3 Turn unit upside down. Attach Feet (E) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
PAGE 5
Assembly Instructions 5/6 Plug F F F STEP 4 Turn over unit to its upright position. Place Containers (F) into position. Place Plugs into position.
PAGE 6
Assembly Instructions 6/6 D D D STEP 5 Place Tops (D) into position. Level unit by adjusting the adjustable levelers on bottom of unit.
PAGE 7
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
PAGE 8
6800-202 Sofa Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List B. Side 2 pcs. For assembly see instructions in carton 6800-201. homestyles Customer Service: www.homestylesfurniture.com, servicedesk@homestylesfurniture.