Instructions / Assembly

ManualsBrandsHOMESTYLES ManualsOutdoor Lounge FurnitureCape Shore Brown 2-Piece Wicker Rattan Outdoor Sectional with Gray Cushions with End Table

Part List

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

6802-402

Sectional

Corner

1 pc.

Seat Cushion

1 pc.

Back Cushion

1 pc.

Back Cushion

1 pc.

Pillow

3 pcs.

Table

1 pc.

Top

1 pc.

styles Customer Service: www.homestylesfurniture.com,home

servicedesk@homestylesfurniture.com,

888-680-7460

Two 6802-401 cartons are also needed for assembly.

Cushion Care Instructions

 Keep cushions free of natural debris.

 Tip and angle cushions after use.

 Store cushions inside when not in use.

 Allow a minimum of 24 hours for wet cushions to air dry.

 Never use a hairdryer on cushions.

 Never put cushions in a clothes dryer.

Summary of content (8 pages)

PAGE 1
6802-402 Sectional IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List E. Back Cushion 1 pc. A. Corner 1 pc. I. Table 1 pc. C. Seat Cushion 1 pc. J. Top 1 pc. F. Back Cushion 1 pc.
PAGE 2
Assembly Instructions 2/3 A B B A A STEP 1 Place Corner (A) at desired location. Place Middles (B) next to Corner (A). Place Corners (A) next to Middles (B). C D STEP 2 Place Seat Cushions (C) and (D) into position.
PAGE 3
Assembly Instructions 3/3 H H H E E F G F Place Back Cushions (E), (F) and (G) into position. Place Pillows (H) into position. J I Place Table (I) at desired position. Place Top (J) onto Table (I).
PAGE 4
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
PAGE 5
6802-10 Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List C. Back Cushion 1 pc. A. Seat 1 pc. B. Seat Cushion 1 pc. Cushion Care Instructions Keep cushions free of natural debris. Tip and angle cushions after use.
PAGE 6
Assembly Instructions 2/2 B A STEP 1 Place Seat Cushion (B) onto Seat (A). C STEP 2 Place Back Cushion (C) into position.
PAGE 7
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
PAGE 8
6802-401 Sectional IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List E. Back Cushion 1 pc. A. Corner 1 pc. B. Middle 1 pc. C. Seat Cushion 1 pc. D. Seat Cushion 1 pc. F. Back Cushion 1 pc.