Assembly Instructions

ManualsBrandsHomestyles ManualsBookcases & ShelvesHomestyles Linear White Storage Bench

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver, Level

Cushion

1 pc.

Back Panel

1 pc.

Base

1 Pc.

20 08000 0027

Storage Bench

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Side Panel

2 Pcs.

Plinth

2 Pcs.

Plinth

2 Pcs.

M3.5x64

Wood Screw

8 pcs.(+1 extra)

Cam Lock

20 pcs. (+2 extra)

Plastic Cap

12 pcs. (+2 extra)

Dowel

20 pcs. (+2 extra)

Cam Lock Screw

20 pcs. (+1 extra)

Summary of content (5 pages)

PAGE 1
20 08000 0027 Storage Bench IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Cushion 1 pc. B. Side Panel 2 Pcs. C. Back Panel 1 pc. D. Base 1 Pc. E. Plinth 2 Pcs. F. Plinth 2 Pcs. Hardware List Cam Lock Screw 20 pcs. (+1 extra) Cam Lock 20 pcs.
PAGE 2
Assembly Instructions 2/4 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench as the bolts may need to be tightened in the future. Cam Lock Screw F F Figure 1 STEP 1 Insert Cam Lock Screws into pre-drilled holes in Plinths (F), then tighten. (See Figure 1) STEP 2 Attach Plinths (E) to Plinths (F) with Cam Locks.
PAGE 3
Assembly Instructions 3/4 STEP 3 Wood Screw Place Base (D) upside down on a soft cloth. Insert Dowels into pre-drilled holes in Base (D). Attach unit to Base (D) with Wood Screws. (See Figure 3) D Dowel Figure 3 C B B Cam Lock Plastic Cap D STEP 4 Cam Lock Screw Dowel Turn unit over to its’ upright position. Insert Dowels and Cam Lock Screws into pre-drilled holes in Base (D). Insert Dowels into pre-drilled holes in Back Panel (C).
PAGE 4
Assembly Instructions 4/4 Cam Lock Screw A STEP 5 Place Cushion (A) upside down on a soft cloth. Insert Cam Lock Screws into pre-drilled holes in Top (A). A Dowel Cam Lock Plastic Cap STEP 6 Insert Dowels into pre-drilled holes in unit. Attach Cushion (A) to unit with Cam Locks. Attach Plastic Caps to Cam Locks.
PAGE 5
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.