Assembly Instructions

ManualsBrandsHomestyles ManualsBar Stools & Counter StoolsHomestyles Linear White Bar Stool

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

Tool(s) required for assembly: Phillips screwdriver

Back Frame

1 pc.

Side Stretcher

1 pc.

Leg

1 pc.

Leg

1 pc.

Front Stretcher

1 pc.

Seat

1 pc.

20 08000 0089

Bar Stool

IMPORTANT

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Side Stretcher

1 pc.

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

Spring Washer

9 pcs.(+1 extra)

Flat Washer

9 pcs.(+1 extra)

M3x38

Wood Screw

6 pcs. (+1 extra)

M8x38

Head Cap Bolt (short)

3 pcs. (+1 extra)

M8x51

Head Cap Bolt

4 pcs. (+1 extra)

M8x82

Head Cap Bolt (long)

2 pcs. (+1 extra)

Summary of content (4 pages)

PAGE 1
20 08000 0089 Bar Stool IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Seat 1 pc. E. Side Stretcher 1 pc. B. Leg 1 pc. F. Side Stretcher 1 pc. G. Front Stretcher 1 pc. C. Leg 1 pc. D. Back Frame 1 pc. Hardware List Hex Wrench 1 pc.
PAGE 2
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench in a safe place as the bolts may need to be tightened in the future.
PAGE 3
Assembly Instructions 3/3 Wood Screw Flat Washer Spring Washer Head Cap Bolt (long) D Flat Washer Spring Washer STEP 2 Head Cap Bolt (short) Attach Back Frame (D) to unit with Flat Washers, Spring Washers, Head Cap Bolt (short), Head Cap Bolts (long) and Wood Screws, tightening bolts only halfway. (See Figures 4 and 5) Tighten all Head Cap Bolts used in Steps 1 and 2.
PAGE 4
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.