ASSEMBLY INSTRUCTION 530C5-29 SPINDLE BACK 29"H BAR HEIGHT CHAIR Chair Back E Box Frame Wooden Seat m Front Leg {Left-Right) pc i 1pe 1pc Side Stretcher (Long) Front Stretcher (Short) Jove Bot {Left-Right) M6 x 70mm M6 x 40mm apes 1pc apes apes n Lock Washer Flat Washer [ Cs-Cb Screw Pan Head Screw #8x11/2" & &= Frisson (s PCs pests PCs PCs Allen Key m Glue M4 x 60mm 1pc 1pe This page lists all the contents included in the box.
Put the Chair Back (A), Box Frame (B) upside down on the soft and smooth surface.With assistance attach 1 Box Frame (B) onto Chair Back (A). Then insert Jibe Bolt (G), Lock Washer (1) and Flat Washer (J) into prevailed holes of each comer by using Allen Key (M). Insert Job Bolt (H), Lock Washer (1) and Flat Washer (J} into the per-drilled holes of the middies of Chair Back (A) by using Allen Key (M). Do not fully tighten the bolts in this step.
Attach Front Leg (D) assembly to corner of Box Frame (B) along inserting the Front Stretcher (F) onto each hole on Front Leg (D) with applying some Glue (N), then insert Jibe Bolt (G}, Lock Washer (1) and Flat Washer (J) using Allen Key (M), Insert Pan Head Screw (L) into the holes of Front Leg (D) and Stretcher (F) by using screwdriver (not included).
Attach Wooden Seat (C) and Box Frame (B) with Cs-Cb Screw (K) by using screwdriver (not included). Tighten all screws in this step. Turn the assembled chair ta the upright position carefully.Make sure the chair is level,and then securely tighten all bolts at this stage. Assembly is now completed. Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven.