ASSEMBLY INSTRUCTIONS E011CE(3A) WOODEN EXTENSION CHAIR A Right side frame 1pc E Front apron 1pc I 1" Screw 4pcs + 1pc reserve B Left side frame C Back Rest 1pc F Back apron 1pc G 1 3/4" Bolt 2pcs + 1pc reserve 1pc D Seat 1pc H 2 1/4" Bolt 6pcs + 1pc reserve J Wooden cap 6pcs + 1pc reserve This page lists all the contents included in the box. Please take time to indentify the hardware as well as the individual components to this product.
1 Attach the back rest(C) and aprons(E & F) into right and left side frame(A&B) to the matching holes. Secure using 1 3/4" bolt(G) and 2 1/4" bolts(H) to left side frame(B), with screwdriver (not provided), position as shown. Don't fully tighten at this step. H B H B H F E Washer G B Washer, from the furniture factory already fitted to the frame. Pointless is existing seats can to join for the other seat.
3 Secure the seat(D) and frame(A&B), using 1" screws(I), position as shown. Tighten all bolts and screws using screwdriver (not provided). B B D D I I A Secure screw with screwdriver (not provided). 4 Tapping the wooden caps(J) to cover bolts using rubber mallet (not provided).The chair is now ready to use. J J 5 To joining the other chair, secure using 2 1/4" bolts(H) with screwdriver (not provided) from underneath of seat. H H Secure bolt with screwdriver (not provided).