Installation Guide

ASSEMBLY INSTRUCTION

E021-35(3A)COFFEE TABLE

1PC

2PCS

SHORT SIDE PANEL

2PCS

BOLT

M6x30MM

8PCS

4PCS

NUT CAP

8PCS

NUT

PVC COVER

WRENCH

This page lists all the contents included in the

box. Please take the time to identify the hardware

as well as the time to individual components to

this product. As you unpack and prepare for

assembly, place the contents on a carpeted or

padded area to protect them from damage.

4PCS

BOLT

M8x35MM

4PCS

BIG FLAT`WASHER

M8x16.5MM

BIG LOCK WASHER

M8x8.5MM

1PC

8PCS

SMALL FLAT`WASHER

M6x12.5MM

SMALL LOCK WASHER

M6x6.5MM

TABLE TOP

LONG SIDE PANEL

1PC

WRENCH

PAGE 1
ASSEMBLY INSTRUCTION E021- 35(3A)COFFEE TABLE A TABLE TOP B SHORT SIDE PANEL 1PC E BIG FLAT`WASHER M8x16.5MM F BOLT M6x30MM WRENCH 1PC N G H NUT SMALL FLAT`WASHER M6x12.5MM K SMALL LOCK WASHER M6x6.5MM 8PCS BOLT M8x35MM 4PCS NUT CAP 4PCS 4PCS 8PCS 8PCS M BIG LOCK WASHER M8x8.5MM 4PCS J D 2PCS 2PCS 4PCS I C LONG SIDE PANEL L PVC COVER 8PCS WRENCH 1PC This page lists all the contents included in the box.
PAGE 2
1 Loosely attach the short side panel(B) to long side panel(C)with small flat washers(J), small lock washers(K), bolts(I), wrench(M) and PVC covers(L). C B C B J K I M L 2 Turn the table top(A ) upside down on the soft clean surface. Loosely attach the base to the table top(A ) with bolt(D ), flat washers (E), lock washers (F), nut(G) , wre nch(N ) and nut cap(H ).
PAGE 3
The table is re ady for your enjoyment . Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft doth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.