Instructions / Assembly

ASSEMBLY INSTRUCTION

E285C2 SEASHELL SHAPED OFFICE CHAIR WITH TILT MECHANISM

Gas Lift

Pentagonal Feet

Caster

Seat

1pc

5pcs

1pc

Base Cap

Bracket with

Bolt

Allen Wrench

1pc

Handle

1pc

M6 x 14mm

4pcs

1pc

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly, place

the contents on a carpeted or padded area to

protect them from damage.

PAGE 1
ASSEMBLY INSTRUCTION E285C2 SEASHELL SHAPED OFFICE CHAIR WITH TILT MECHANISM A Gas Lift B 1pc E Base Cap 1pc C Pentagonal Feet 1pc F Caster D 5pcs G Bracket with Bolt Seat 1pc H Allen Wrench Handle M6 x 14mm M6 1pc 4pcs 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
1 Attach Caster (C) to Pentagonal Feet (B) as shown. 2 Attach Gas Lift (A) and Base Cap (E) to Pentagonal Feet (B) as shown.
PAGE 3
Attach Bracket with Handle (F) to Seat (D) by Bolt (G) and Allen Wrench (H) as shown. 4 Attach assembled seat to assembled base as shown. Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.