Instructions / Assembly

Table Of Contents

ASSEMBLY INSTRUCTION

E945-13 PIPING BENCH

B D

1pc

4pcs

Seat

Leg

8pcs

8pcs 1pc

Bolt

Ø5/16"x2"

Flat Washer

Ø5/16"x19mm

Lock Washer

Ø5/16"x13mm

Allen Key

8pcs

This page lists all the contents included in

the box.

Please take the time to identify

the hardware as well as the individual

components to this product. As you

unpack and prepare for assembly, place

the contents on a carpeted or padded

area to protect them from damage.

PAGE 1
ASSEMBLY INSTRUCTION E945-13 PIPING BENCH A Seat B Leg 1pc E Lock Washer Ø5/16"x13mm 4pcs F Allen Key M5 8pcs C Bolt Ø5/16"x2" 8pcs D Flat Washer Ø5/16"x19mm 8pcs 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
1 Open the non-woven fabric at the bottom of Seat (A), attach Leg (B) to Seat (A) using Bolt (C), Flat Washer (D), Lock Washer (E) by Allen Key (F) as below shown. E B D C Leveler Turn left or turn right to adjust the leveler until the bench is stabilized. B F A Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.