VENTILATING BATH FAN WITH BLUETOOTH® SPEAKER MODEL #7130-01-BT Español p. 14 The BLUETOOTH® word mark and logos are registered trademarks owned by BLUETOOTH SIG, Inc. and any use of the said mark by Homewerks Worldwide is under license. Other trademark and trade names are those of their respective owners. Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-319-3757, 8 a.m. - 5 p.m., CST, Monday - Friday. READ AND SAVE THESE INSTRUCTIONS www.
TABLE OF CONTENTS Product Specifications.........................................................................................................................2 FCC Compliance.................................................................................................................................2 Package Contents...............................................................................................................................3 Hardware Contents..........................................
PACKAGE CONTENTS A C B D E PART A B C DESCRIPTION Fan body Grille w/Bluetooth® Speaker Suspension Bracket I QTY 1 1 1 PART D E HARDWARE CONTENTS (not actual size) AA BB Long Wood Screw Short Machine Screw Qty. 8 Qty. 3 www.homewerksww.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. 1. Always disconnect the power supply prior to servicing the fan, motor or junction box. 2. Installation work must be carried out by a qualified person(s) in accordance to all local and safety codes including the rules for fire-rated construction. 3.
PREPARATION Tools Required for Assembly (not included): Hammer, Flathead Screwdriver, Wire Nuts, Nails, Duct Tape, Phillips Head Screwdriver, Utility Knife Helpful Tools (not included): Electric Drill, Drill Bits WARNING: Turn off electricity at breaker box before beginning installation. Carefully remove unit from carton. Check area above installation location to be sure that wiring can run to the planned location and that duct work can be run and the area is sufficient for proper ventilation.
ASSEMBLY INSTRUCTIONS new construction – Attaching to the joist BEFORE INSTALLATION Turn off power source. Review all safety precautions. 1. Insert suspension bracket onto fan housing using suspension bracket I (C) and II (D). If spacing between joists is 21.5 in. to 23.5 in. attach suspension bracket III (E). 1 C E D 2 3. Secure the fan housing to joist with suspension brackets using long wood screws (AA) (included). (Joist spacing of less than 21.25 in.) 3 4. Mounting with joist spacing of 21.
ASSEMBLY INSTRUCTIONS 5. Secure the suspension bracket I (C) to fan housing using short machine screw (BB) (included). 5 6. Remove fan junction box cover. Using quick connect ports connect house wires to fan wires as shown in wiring diagram on page 5. Replace fan junction box cover. 6 Duct Wiring box House wires 7 7. Connect a 4 in. circular duct and vent to the outside. Secure it with duct tape or clamp. Turn on power source. Test the fan.
ASSEMBLY INSTRUCTIONS 2 3. If this fan is not replacing an old fan be sure to cut a 9.4 in. x 9.4 in. opening for the fan housing. 3 4. Insert suspension bracket onto fan housing using suspension bracket I (C) and II (D). If spacing between joists is 21.5 in. to 23.5 in. attach suspension bracket III (E). 4 4 5 6 7 8 9 10 11 1 2. Measure the opening to assure it is large enough to accommodate the new fan housing (9.4 in. x 9.4 in.). 9.4" " 9.4 C E D 5 6.
ASSEMBLY INSTRUCTIONS 7. Secure the suspension bracket I (C) to fan housing using short machine screw (BB) (included). 7 8. Remove fan junction box cover. Using quick connect ports connect house wires to fan wires as shown in wiring diagram on page 5. Replace fan junction box cover. 8 Duct Wiring box House wires 9. C onnect a 4 in. circular duct and vent to the outside. Secure it with duct tape or clamp (not supplied). Quick connector Product wires 9 Turn on power source. Test the fan.
BLUETOOTH SPEAKER FAN GRILLE INSTALLATION 2. Attach grille by pinching mounting springs and insert into narrow rectangular slots in the fan housing. 2 Turn on power source. PAIRING YOUR BLUETOOTH® DEVICE TO THE SPEAKER 1. To play your personal music files, you need a wireless BLUETOOTH® device. 2. Set your device to a midrange volume before connecting to the speaker. 3.
BLUETOOTH® SPEAKER AND FAN OPERATION 3. Fan and BLUETOOTH® SPEAKER OfF 3 Move wall on/off switch to “OFF” position. CARE AND MAINTENANCE See safety information before proceeding. Routine maintenance should be done at least once a year. • Never use solvents, thinner or harsh chemicals for cleaning the fan. • Do not allow water to enter the motor. • Do not immerse metal parts in water. • Do not immerse resin parts in water over 140 degrees Fahrenheit.
CARE AND MAINTENANCE 3. Wash and clean the grille in a sink and dry with a cloth. 3 4. Remove dust and dirt from the fan housing with a vacuum cleaner. 4 5. Dampen cloth with dust detergent, wipe the fan housing and wipe dry with a cloth. 5 6. Replace the BLUETOOTH® speaker and grille. 6 Turn on power source. 12 www.homewerksww.
TROUBLESHOOTING PROBLEM The fan seems louder than it should POSSIBLE CAUSE CORRECTIVE ACTION CFM too great Be sure the CFM rating on the fan matches the size of your room. Damper not working properly or damaged Check damper to ensure it is opening and closing properly. If the damper has become damaged, please call Customer Service. Bend in duct too close to fan discharge Be sure you do not have any sharp bends in duct closer than 18 in. to the fan discharge.
