INSTALLATION MANUAL 2-Func�on Commercial Kitchen Faucet 0610004A25 84D9004A26 2663004A27 www.homluxproducts.
Business Name: FDC Development LLC Business Address: 100 Po�ery Rd Commerce, GA 30529 US Web: www.homluxproducts.com Any queries? Please feel free to contact our service team: EMAIL: help@homluxproducts.com TEL: (800) 209-3199 (MON-FRI 9:00am-5:00pm Eastern Time) Thanks for Choosing Us. Please keep the box and packaging materials un�l your product is completely installed.
Prior to installa�on Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact our Customer Service. Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove exis�ng faucet. Clean sink or countertop to remove any debris, plumber’s pu�y, or silicone. Flush angle stops to release any debris prior to installa�on.
Package Included Note: The flexible spring allows the faucet to rotate 360° Faucet Kit Moun�ng Hardware Waterlines Hex Wrench Replacements Note: Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact our Customer Service.
Installa�on Guide 30 32 STEP 1: INSTALL THE SPRAY HEAD 31 33 STEP 2: REMOVE MOUNTING HARDWARE Remove the moun�ng nut(32), moun�ng screws(33), metal washer(31) and rubber washer(30) from the moun�ng pipe. Remove the plas�c protec�ve cover. Connect the spray head into coupler. STEP 3: FAUCET INSTALLATION STEP 4: INSTALL FAUCET BODY For three-hole installa�on: Install deck plate, base plate, and silicone. For single-hole installa�on: Install base plate. Insert faucet into hole in countertop.
30 32 31 33 STEP 6: SECURE MOUNTING HARDWARE STEP 5: INSTALL MOUNTING HARDWARE Install the rubber washer(30), metal washer(31), moun�ng nut(32) and moun�ng screws(33), in order from undeneath the countertop to the faucet. Adjust direc�on of faucet body and handles. Tighten moun�ng nuts(32) and mounitng screws(33) with screwdriver un�l snug. STEP 7: CONNECT WATERLINES STEP 8: FLUSH SPRAY HOSE Connect waterlines(34) to hot and cold copper lines. Connect waterlines to angle stops.
