Installation Guide

Tools You Will Need:

1. Insert faucet through center hole,

assembly washer & metal washer, onto

faucet and tighten with lock nut.

3. Screw and tighten the exible hoses to

the faucet. Do not allow the water supply

brass tube to twist.

4. Attach two exible hoses to water

supply.

2. Proper installation of the hose weight

kit will ensure that the spray handle

retracts smoothly.

On the spray side of the hose, measure

15” down from the body of the faucet

and install the hose weight kit at this

point. Pull out on the spray head. It

should move easily and retract smoothly.

Reposition the hose weight kit as

necessary. Make sure that the hot and

cold supply hoses do not interfere with

the spray hose. They can be repositioned

slightly if necessary.

INSTALLATION GUIDE

PAGE 1
INSTALLATION GUIDE Tools You Will Need: 1. Insert faucet through center hole, assembly washer & metal washer, onto faucet and tighten with lock nut. 3. Screw and tighten the flexible hoses to the faucet. Do not allow the water supply brass tube to twist. 2. Proper installation of the hose weight kit will ensure that the spray handle retracts smoothly. On the spray side of the hose, measure 15” down from the body of the faucet and install the hose weight kit at this point. Pull out on the spray head.