All safety and operation instructions should be read thoroughly before proceeding and please keep the handbook for future reference.
10 2 6 6 6 6 7 7 8 8 8 Setting The Time Setting The Daylight-saving Time Alarm Operation Fm Radio Operation Bluetooth Mode Operation Listening To Music Adjusting Display Brightness Usb Charging Backup Battery 8 6 Power On 6 4 3 3 3 9 1
1
2
Product Size: 138(L)×138(W) × 60(H)mm Wireless Charging Efficiency: 70%~80% Wireless Distance: 6mm Wireless Charger Output: 10W Wireless Charging Current: 5V 1A / 9V 1.1A USB Charging Port Output: DC 5V 1A FM Frequency Response: 87.5 - 108MHz Distortion Rate: <1% S/N Ratio: >65dB Frequency Range: 40Hz-20KHz: 40Hz-20KHz Power Adapter: DC 9V 2A Output Power: 3W+3W Bluetooth Distance: Within 10 meters Bluetooth Profiles: HSP, HFP, A2DP and AVRCP Bluetooth Version: 5 .
4 5V——1A DST/GMT/－ SET 16 12H/24H/＋ 16 Hour Mode Switch Set clock time Set clock & Daylight-Saving USB Play/Charging Mode FM Antenna TPYE-C Charging Mode Daylight-Saving Mode AM/PM Mode FM Mode Alarm Time SLEEP Bluetooth Mode USB Charging Mode Wireless Charging Mode USB Charging Mode SNOOZE
Turn on/off Alarm2 Set alarm clock and alarm ringtone Play music: Backward song Set alarm: Time+ FM mode: Short press to select the radio station; Long press for auto scanning Alarm 2 BACKWARD SONG/Adjusting Alarm Time SNOOZE/DIMMER Play music: Next song Set alarm: Time－ FM mode: Short press to select the radio station; Long press for auto scanning Adjust LCD brightness levels Short press to activate Snooze; Press and hold it for 3 seconds to turn off alarm Turn on/off Alarm1 Set alarm clock and alarm
SET DST/GMT/－ 12H/24H/＋ 12H/24H/＋ DST/GMT/－ SET 12H/24H/＋ SET 6 Before setting the alarm time, make sure Clock has been set. Setting the alarm 1 Press on the top of the unit to turn on the alarm 1. The alarm 1 symbol will flash on the display. Press or on the top of the unit to select an alarm sound source: BU and RAD, and press to confirm. The hour digit will flash on the display. Press or to set the hour. Press to confirm.
Paring with a Bluetooth-enabled device Press on the top of the unit to select the Bluetooth mode. The Bluetooth symbol will flash on the display, indicating that the unit is trying to pair with a Bluetooth enabled device. Go to the Bluetooth setting on your Bluetooth enabled device .Search and connect to “D8qi”. The Bluetooth symbol will stop flashing when your Bluetooth device has been paired successfully. An audible alert “Du” will sound.
8 WIRELESS CHARGING Put the Qi receiver-enabled device on the top of the unit, where the Qi logo is printed. During wireless charging, the symbol will be on the display. It will disappear from the display when the device is fully charged. The symbol begins to flash quickly when abnormal charging happens. BACKUP BATTERY The battery used for the unit is one CR2032 battery(included). You can only use AC power as power supply. The battery is only for backup purpose.
9
10 Homtime Group LTD info@homtime.com www.homtime.
RF warning for WPT device: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15cm surrounding the device and 20 cm above the top surface of the device must be respected. RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement.The device can be used in portable exposure condition without restriction.
