Handbook

IMPORTANT NOTES ABOUT WIRELESS CHARGING
a. If your device does not support wireless charging, please purchase a wireless charging case separately. b. Use only the approved power supply, otherwise, it will cause danger. c. Do not put a wireless charging case on the unit separately, which may cause the charging surface too hot and then cause fire disaster. It may cause serious burns or device failure. d. To charge a device without wireless charging function, please put on a wireless charger case for your device, then put it on the unit for wireless charging. e. Do not put any foreign objects including metal, magnetic absorbers and IC cards in the charging detective area, which may cause abnormal charging or damage the unit because of too much heat. f. Please take always the device from the charging area when the device is fully charged. g. Please place the device on the charging area correctly to make sure the wireless charging works properly. h. Over 6mm thickness phone case may result in charging intermittently or discontinued. Please take off the phone case before charging. j. During wireless charging, if connecting power supply to the phone device, it will stop the wireless charging.
ADJUSTING DISPLAY BRIGHTNESS Repeatedly press to select the desired level of display brightness (High-Medi- um-Low-Off).
USB CHARGING To charge your USB-compatible devices, plug them in the USB port on the rear of the unit and turn the unit on. The charging symbol will light up to indicate charging. The symbol will disappear from the display when the device is fully charged. BACKUP BATTERY The battery used for the unit is one CR2032 battery(included). You can only use AC power as power supply. The battery is only for backup purpose. If the system is unplugged or if a power failure occurs, the clock and alarm time settings of the unit will be erased unless there is a battery in the unit.
WIRELESS CHARGING Put the Qi receiver-enabled device on the top of the unit, where the Qi logo is printed. During wireless charging, the symbol will be on the display. It will disappear from the display when the device is fully charged. The symbol begins to flash quickly when abnormal charging happens.
8