User's Manual

CB-85/MB-85/EC-85/MC-85
User Guide
Doc. No. MV-S800477-00 Rev. B CONFIDENTIAL Copyright © 2007 Marvell
Page 24 Document Classification: Proprietary Information August 14, 2007, 2.00
3.2.2 Profile Setting—Security Tab
Clicking the Security tab displays the following security options:
 Authentication Mode
 Encryption Method (Security off, WEP, TKIP, and AES)
 Key settings (for legacy authentication modes) or 802.1X Authentication Protocol selection (for
802.1X authentication modes)
Region Code Sets the region code
Available options are Default, USA (FCC), Canada (IC), Europe (ETSI),
Spain, France, Japan (MKK), Taiwan (DGT), and Australia/Korea
802.11n Network Enables/disables draft-802.11n functionality
If enabled, the Modulation and Coding Scheme (MCS) index and 802.11n
options can be configured.
Channel Width Sets the channel bandwidth
Available options are Auto, 20 MHz, and 40 MHz. The default is Auto.
Guard Interval Sets the Guard Interval
Available options are Auto, Standard, and Short. The default is Auto.
Extension Channel Sets the extension channel mode when bandwidth is 40 MHz
Available options are Auto, None, Lower, and Upper. The default is Auto.
Antenna Selection Sets the antenna selections
Available options are Auto, Antenna A, Antenna B, 2 by 2, and 2 by 3.
The default is Auto.
Note
The fields Wireless Mode and Preferred Channel are used only when a new Ad-Hoc
network is initiated by the client card. These two attributes are ignored when the client
card is connected to an existing Ad-Hoc network with the same desired SSID.
Table 4: Network Info Tab Description (Continued)
Field Description