User Manual

WARNING: Avoid electric shock! Do not open the cover of this product. Opening
or removing the cover may expose you to dangerous voltages. If you open the cover,
your warranty will be void. This product contains no user-serviceable parts.
WARNING: Avoid electric shock and fire hazard! Never push objects through
the openings in this product. Foreign objects can cause electrical shorts that can result
in electric shock or fire.
Provide Ventilation and Select a Location
•
Remove all packaging material before applying power to the product.
•
Do not place this apparatus on a bed, sofa, rug, or similar surface.
•
Do not place this apparatus on an unstable surface.
•
Do not place this apparatus in excessive heat or moisture.
•
Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the installation
provides proper ventilation.
•
Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with
liquids, or other objects on top of this product.
• Do not block ventilation openings.
Operating Environment
This product is designed for operation indoors with a temperature range from 32° to 104° F (0°
to 40°C). Each product should have adequate spacing on all sides so that the cooling air vents
on the chassis are not blocked.
Protect from Exposure to Moisture and Foreign Objects
Service Warnings
Check Product Safety
Upon completion of any service or repairs to this product, the service technician must perform
safety checks to determine that this product is in proper operating condition.
Protect the Product When Moving It
Always disconnect the power source when moving the apparatus or connecting or disconnecting cables.
United States FCC Compliance
This device has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
such interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment OFF and ON, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the service provider or an experienced radio/television technician for help.
The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the
FCC and is intended to supply you with information regarding the FCC approval of this device. The
phone numbers listed are for FCC-related questions only and not intended for questions regarding
the connection or operation for this device. Please contact your service provider for any questions
you may have regarding the operation or installation of this device.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
RF Exposure - This device is only authorized for use in a mobile application. At least
20 cm of separation distance between the set top device and the user's body must be
maintained at all times.
Responsible Party: Technicolor, 101W. 103rd St., Indianapolis, IN 46290 USA, 317-587-5466.
Declaration of Conformity
This device complies with Part 15 of FCC Rules. Operation is subject to the following two
conditions: 1) the device may not cause harmful interference, and 2) the device must accept any
interference received, including interference that may cause undesired operation.
Canada EMI Regulation
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada.
AVC Video License
With respect to each AVC/H.264 product, we are obligated to provide the following notice:
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE
FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES
NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH
THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/
OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC
VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
HTTP://WWW.MPEGLA.COM..
Accordingly, please be advised that service providers, content providers, and broadcasters may
be required to obtain a separate use license from MPEG LA prior to any use of AVC/H.264
encoders and/or decoders.
Rovi Corporation Copyright Notice
This product incorporates copyright protection technology that is protected by U.S. patents
and other intellectual property rights of Rovi Corporation. Use of this copyright protection
technology must be authorized by Rovi Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Disclaimer
Technicolor will not be responsible for any licensing fees payable to Rovi Corporation, and
Technicolor will not have any indemnification obligations relating to any claims asserted by Rovi
Corporation, or by any entity controlled by, controlling, or under common control with Rovi
Corporation (“Rovi Entities”), or any entity used to license intellectual property of the Rovi Entities,
and the successors and assigns of the foregoing entities, including any claim related to electronic
programming guides alone or in combination with any equipment provided by Technicolor.
Open Source Software Notification
This product may contain certain open source software modules which are subject to Open
Source Software license terms.
A list of the Open Source Software used or provided under this release and their corresponding
Licenses and version number are available on Technicolor’s website at the following address: http://
www.technicolor.com/en/hi/minisites/open-software or at another address as Technicolor may
provide from time to time.
If and where applicable, depending on the terms of the applicable Open Source Software licenses,
the source codes of the Open Source Software are available for free on Technicolor’s website at
the following address: http://www.technicolor.com/en/hi/minisites/open-software.
For avoidance of doubt, Open Source Software is only licensed by the original owner of the
Open Source Software under the terms set forth in the designated Open Source License.
Trademark Statements
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
Rovi is a trademark of Rovi Corporation.
78 -4041467- 01C0
TECHNICOLOR
1-5, rue Jeanne d’Arc
92130 Issy-les-Moulineaux
France
www.technicolor.com
Copyright 2016 Technicolor. All rights reserved.
All tradenames referenced are service marks,
trademarks, or registered trademarks of their
respective companies. Specifications subject to
change without notice.
DMS3-SAF-25-263 v1.0
WARNING: Avoid electric shock and fire hazard! Unplug this product before
cleaning. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/
static cleaning device (dust remover) to clean this product.
WARNING: Avoid electric shock and fire hazard! Do not expose this product
to dripping or splashing liquids, rain, or moisture. Objects filled with liquids, such as
vases, should not be placed on this apparatus.