User's Manual

8
Chapter 3 Adapter Installation and Configuration – Windows ® 98 / 2000
3-1
SYSTEM REQUIREMENTS
In order to install and use the U58H004 MiniPCI card your PC system must meet the following requirements:

A PCMCIA Type II or Type III slot / Type III MiniPCI slot
 PCMCIA/MiniPCI revision 2.10 compliant card and socket services
 Windows 98 (with the Floppy, for use during installation)
 500 Kbytes free disk space for utility and driver installation
3-2 INSERTING THE ADAPTER
To insert the U58H004 Network Adapter into a notebook computer, do the following:
1. Locate an available Type II or Type III PCMCIA slot / Type III MiniPCI slot.
2. With the PCMCIA adapter’s 68-pin / MiniPCI Adapter’s 124-pin connector facing the PCMCIA/MiniPCI
slot and the “U58H004 MiniPCI” label facing up slide the PCMCIA adapter
completely into the PCMCIA slot , the MiniPCI Adapter completely into the MiniPCI slot.
Notebook with
T60L198/U58H004
PCMCIA slot
MiniPCI slot
Notebook with
T60L198/U58H004
Fig. 5.1 Insert the PCMCIA Adapter into Notebook Fig. 5.2 Insert the MiniPCI Adapter into Notebook
After properly inserting the Network Adapter into your notebook, continue with the U58H004 driver
and Lan-Express Configuration Utility installation.