User Manual

8
Cisco Edge 300 Series Switch Installation Guide
OL-24909-01
Installing the Switch
Statement 1047
Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum
recommended ambient temperature of:
104°F (40°C) Statement 1047
Statement 1074
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
Statement 1076
Warning To prevent airflow restriction, allow clearance around the ventilation openings to be at least:
3 inches (7.6 cm) Statement 1076
Caution Be aware of the size and weight of the switch when mounting. Ensure that the mounting location has a
stable flat surface and can safely support the weight of the switch.
Installing the Switch on a Wall
Statement 378
Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people
and damage to the system. Statement 378
You can mount the switch horizontally or vertically on a wall.
Note The wall-mount bracket has four slots (in two pairs) on its bottom panel (see Figure 5).