User's Manual

DB 6520
© (2014) ADB Broadband S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
12 Router Installation
POWERING UP THE
ROUTER
To power up the Router:
1. Plug the power adapter into the power adapter port located on the rear of
the Router
2. Plug the power adapter into a standard electrical wall socket
3. Press the Power button located on the rear panel of the Router
4. Wait for the power LED to turn steady green
CONNECTING THE
ROUTER
The first step to install the router is to physically connect it to the telephone
socket and then connect it to a computer by means of an Ethernet connection.
To connect the phone cables (valid only for bonding models):
1. Connect one end of the first phone cable into the DSL filter port; the other
end of the phone cable shall be inserted into the first DSL port on the rear of
the Router.
2. Connect one end of the second phone cable into second phone line con-
nector available on the wall; the other end of the cable shall be connected to
the second DSL port on the rear panel of the router. (this is valid only for
bonded models)
FIGURE 2. Phone Cables Connection