User's Manual

10 HP DreamScreen User Guide
Initial Setup
Initial configuration from factory default settings
The first time you turn your HP DreamScreen on, it will be in factory default mode.
A demonstration video with sound will automatically play.
1 Watch and enjoy the video. A welcome screen with a Continue button appears.
Or
Press OK or Back to stop the demonstration video. A welcome screen appears.
2 Press OK to continue. A screen with a guide for using the remote control unit appears.
3 Press OK again. The home (main menu icon) screen appears.
Your HP DreamScreen is ready to show videos, show photos, and play music.
Restoring factory default settings
1 Use or to select Setup from the main menu.
2 Press OK.
3 Press
to select Info.
4 Press OK to open the System Information page.
5 Press
and then to select Factory Default.
6 Press OK. A dialog box appears with a warning that continuing will erase all settings.
7 Select Yes and press OK to continue setting factory defaults, or Select No and press
OK to quit changing settings to factory defaults. If you choose to continue, the HP
DreamScreen will restart.
8 Reconfigure your network and any other settings in Setup (see “Setup”, “Network Setup
- wired”, and “Network Setup - wireless” under “Menu Options.
NOTE: The following instructions are shown using the remote control unit. Most of these
functions can also be conducted using the control keys located on the bottom right side of the
HP DreamScreen (when orientated in the horizontal position). The keys are labeled with
similar icon/text.
NOTE: There are other setup tasks that you should do to enable other features. Many
features (such as Weather, Facebook, Snapfish, HP Smart Radio, and Pandora) require
a network connection. To configure the additional features, see the “Setup” section and
the “Network Setup - wired” and “Network Setup - wireless” subsections, in this
document as well as the other menu item sections that follow.
Note: This does not remove any personal data from your HP DreamScreen.
CAUTION: It takes several minutes to restore the HP DreamScreen to the
factory default settings. Do not unplug or attempt to stop the HP
DreamScreen until after it begins to play the introductory video.