User's Manual
Table Of Contents
- Conventions
- What’s in the Box
- Getting Started
- Remote Control
- Navigating the Keyboard Utility
- HP DreamScreen
- Key Features
- Initial Setup
- Photo Slide Show and Browse
- Managing Photos
- Using a PC as an External Media Source
- Menu Options
- HP DreamScreen PC Software
- Installing HP DreamScreen PC Software
- Running HP DreamScreen PC Software
- Troubleshooting
- Specifications
- Frequently Asked Questions
- Cleaning and Care Tips
- Regulatory and Safety Information
- Index
HP DreamScreen User Guide 21
26 Select Enter and press OK.
27 Select Continue and press OK.
Network Setup - wireless
1 Press OK to examine or change your network configuration settings.
2 Select Change and press OK.
3 Select Wireless and press OK.
4 Select Continue and press OK.
5 Press
to select the network name of the wireless router to which you want to connect.
Then press OK. Then select Continue and press OK. The password entry keyboard
appears.
Or
If the name of your chosen network is not shown because broadcast SSID is disabled,
select Set Network Manually and press OK. Then use
or to select Continue
and press OK. The Set your WIFI Network page appears.
Network name (also known as the server set identifier, or SSID). This is displayed if
the wireless router has broadcasting of the SSID enabled. It is case sensitive
Security - the security type used by the router. The choices are: None, WEP (OPEN),
WEP (SHARED), WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and WPA2-
PSK (AES)
Password - The password for WEP and WPA security types is a key that is
generated by a passphrase that is entered when the router is configured. The key is
what you need to enter in the password field.
6 If you are starting at the Set your WIFI Network page, Select the Network Name field
and press OK to select the keyboard. Otherwise, go to step 9.
7 Use the navigation controls to select the first character of the network name. Then press
OK.
Continue until you have spelled out the new network name.
8 Use the arrow buttons to select Enter on the keyboard. Then press OK.
9 Press
to select the Security field.
10 Press
or to select the desired security option from those listed in the Security field.
11 Press
to select the Password field. Then press OK to select the keyboard.
12 Use the navigation controls to select the first character of the password. Then press OK.
NOTE: If you only want to examine the network settings, press OK after viewing them to
exit without changing any configuration.
NOTE: If the wireless router is using any security, you will need to know some of the
following information:
NOTE: If the security option used by the wireless router is None, the password should
be left blank.