User's Manual
Table Of Contents
- Conventions
- What’s in the Box
- Getting Started
- Remote Control
- Navigating the Keyboard Utility
- HP DreamScreen
- Key Features
- Initial Setup
- Photo Slide Show and Browse
- Managing Photos
- Using a PC as an External Media Source
- Menu Options
- HP DreamScreen PC Software
- Installing HP DreamScreen PC Software
- Running HP DreamScreen PC Software
- Troubleshooting
- Specifications
- Frequently Asked Questions
- Cleaning and Care Tips
- Regulatory and Safety Information
- Index
HP DreamScreen User Guide 3
Wall Mounting
To prepare the HP DreamScreen 100 or HP
DreamScreen 130 for wall mounting, unscrew
the stand.
Holes for wall mounting are provided on the rear
of the HP DreamScreen.
The distance between the mounting holes (A)
is 78.7 mm (3.098 in).
The mounting hole diameter is 8.5 mm (0.33 in).
The width of the notch (B) at the top of each mounting hole is 5.1 mm (0.20 in).
Recommended Screw Size:
z Standard: #8 pan-head wood screws, or pan-head tapping screws used with
drywall anchors. Minimum screw length 25 mm (1in).
z Metric: M4 pan-head wood screws, or pan-head tapping screws used with
drywall anchors. Minimum screw length 25 mm (1in).
NOTES:
The HP DreamScreen can only be wall mounted horizontally.
Mounting hole placement and size are the same for the HP DreamScreen 100 and
the HP DreamScreen 130.
HP does not supply wall mounting screws for the HP DreamScreen.