User Manual

9–4 Hardware Guide

Additional Hardware Options

3. To release the PC Card, press the PC Card eject button 1.

4. Gently pull out the PC Card 2.

Removing a PC Card

Using an SD Card

An SD Card is smaller than a PC Card, but can add similar

functions to the tablet PC system. Most commonly, an SD Card is

used to add backup, storage, wireless network, fax/modem, or

cellular telephone functions.

When using an SD Card, HP recommends that you connect the

system to external power whenever possible. Some SD Cards use

large amounts of power and can quickly drain a battery pack.

CAUTION: To prevent loss of work or damage to an SD Card:

■ Do not save your work to an SD Card unless the tablet PC is

connected to external power or you are certain that the battery

pack has enough charge remaining to complete the operation.

■ Do not shut down the tablet PC or remove the SD Card until all

activities supported by the card are complete.

331734-001.book Page 4 Monday, July 14, 2003 3:47 PM