User Manual

4–4 Hardware Guide
Drives
Inserting or Removing Drive Media
For general information about inserting or removing a drive from
a MultiBay, refer to the documentation included with an optional
External MultiBay or Docking Station. This section provides
information that is not provided with optional drives or
MultiBays and that may be helpful to users unfamiliar with
standard removable drives.
Inserting a CD or DVD
1. Be sure the tablet PC is turned on.
2. Press the media release button 1 on the drive bezel to release
the media tray, then pull the tray outward until it is fully
extended 2.
3. Position a CD or one-sided DVD over the tray label side up.
4. Gently press the disc onto the tray spindle 3 until the disc
snaps into place. Handle the disc by the edges, not the flat
surfaces. (If the media tray is not fully extended, tilt the disc
to position it over the tray spindle, then press it downward
into position.)
5. Close the media tray 4.
Inserting a CD or DVD into an optical drive
331734-001.book Page 4 Monday, July 14, 2003 3:47 PM