User Manual

6–2 Hardware Guide
Internal Modem
Connecting the Modem
Selecting Connectors
The modem must be connected to an analog telephone line.
Å
WARNING: To reduce the risk of electric shock, fire, or damage to the
equipment, do not plug a telephone cable into the RJ-45 network jack.
Ä
CAUTION: Jacks for digital PBX systems may resemble RJ-11 telephone
jacks, but are not compatible with the modem.
Jacks for analog telephone lines and procedures for connecting
the modem vary by country:
■ If you are connecting the modem in a country where
RJ-11 telephone jacks are standard, follow the instructions
in the “Connecting the Modem to an RJ-11 Jack” section,
next in this chapter.
■ If you are connecting the modem in a country where RJ-11
telephone jacks are not standard, a modem adapter specific to
the country in which you purchased the tablet PC is included
with the tablet PC. Follow the instructions in the “Connecting
the Modem with an Adapter” section, later in this chapter.
■ If you plan to use the modem outside the country in which
you purchased the tablet PC, you can purchase adapters
specific for the countries on your itinerary from most
computer or electronics retailers. For information about
using country-specific software configurations, see the
“Setting Country Preferences” section, later in this chapter.
331734-001.book Page 2 Monday, July 14, 2003 3:47 PM