User Manual

6–4 Hardware Guide
Internal Modem
Connecting the Modem with an Adapter
To connect the modem to an analog telephone line that does not
have an RJ-11 telephone jack:
1. To access the RJ-11 jack 1, open the upper panel of the
tablet PC.
2. If the modem cable has noise suppression circuitry 2, which
prevents interference with TV and radio reception, orient the
circuitry end of the cable toward the tablet PC.
3. Plug the modem cable into the RJ-11 telephone jack 3 (not
the RJ-45 network jack) on the tablet PC.
4. Plug the modem cable 4 into the country-specific modem
adapter.
5. Plug the country-specific modem adapter 5 into the
telephone jack.
Connecting the modem with a modem adapter
(Telephone wall jacks vary in appearance by region.)
Å
WARNING: To reduce the risk of electric shock, disconnect the modem
from the telephone network before accessing an internal compartment
of the tablet PC. Internal compartments include the memory and
Mini PCI compartment and the hard drive bay.
331734-001.book Page 4 Monday, July 14, 2003 3:47 PM