User's Manual

 Section One: Introduction
The Bluetooth Module use a monolithic single-chip, Broadcom BCM2045 and it can compliant Bluetooth
2.0.This Bluetooth module is base on the highly integrated BCM2045 stand-alone baseband processor with an
integrated 2.4GHz transceiver. It is fully compliant with the Bluetooth radio specification and incorporates new
modulation schemes to support enhanced data rate(EDR) of 3MBps.
1.1 Features
1.1.1 Bluetooth Function
o Bluetooth radio firmware is upgradeable for bug fixes, initial version compatible with Bluetooth
specification version 2.0
o Fully compliant to Bluetooth SIG (BQB) compatibility testing.
o USB Pin assignment is to use MDC reserve pin to communicate with Host.interface
o Bluetooth Profile Support
- Pim Item Transfer
- Pim Synchronization
- Network Access
- Dial-up Networking
- Bluetooth Serial Port
- Fax
- Audio Gateway
- Headset
- Bluetooth Imaging
o Drivers support Windows 98, 98SE, ME, 2000, XP.
o Supports Power Management
1.2 Hardware Requirements
Supply Voltage 3.3V
Frequency Range 2.400-2.4835 GHz
Antenna Load 50 Ohm
Receive Sensitivity –78 dBm@0.1% BER
Maximum Receiver Signal -20 dBm
TX Power 4 dBm maximum (class 2)
RF Power Control Step Size 2 dB
Range 10 meters at 0 dBm TX power (class 2)
Radio Compliant with Bluetooth radio specification and incorporates
new modulation schemes to supports enhance data rate (EDR)