User's Manual

COMPANY CONFIDENTIAL
9
3.4.2 Operating System Support
The driver must support the following Operating Systems at product introduction:
Linux, Microsoft Windows XP, Vista and Win7 drivers.
3.4.3 Software Functions
The software must support the following functions:
 Auto scan to find AP nearby and show signal strength for each channel.
 Support WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE
802.11x, IEEE 802.11i
 Easily use software to upgrade from BTv2.1+EDR to BTv3.0 + HS
4. Compatibility and Certification Requirements
The 802.11b/g/n module shall pass the standard test plan, which includes hardware
compatibility and reliability, and software compatibility test.
 FCC Compliance
One of the main reasons for considering a PWB module is that customer prefers to have
the ODM supplier perform FCC Part 15B and 15C (15.247) for 2.4GHz. The module is
being considered for multiple products. The customer is responsible for FCC Part 15B
product compliance testing.
 Wi-Fi Certification
It is understood that Wi-Fi Certification is a system responsibility, however, the customer
would really like to have the ODM supplier consider performing this service, or at the very
least aid with testing.
5. Product Quality
The product quality must be followed-up by Foxconn factory quality control system.
6. Environmental Requirements
6.1 Temperature
6.1.1 Operating Temperature Conditions
The product shall be capable of continuous reliable operation when operating in ambient
temperature is 0℃ to +70℃.
6.1.2 Non-Operating Temperature Conditions
Neither subassemblies shall be damaged nor shall the operational performance be
degraded when restored to the operating temperature when exposed to storage
temperature in the range of -10 to +℃ 85 .℃
6.2 Humidity
6.2.1 Operating Humidity Conditions
The product shall be capable of continuous reliable operation when subjected to relative
humidity in the range of 5% and 95% non-condensing.