HON HAI PRECISION IND. CO., LTD. No.2, 2nd Dong Huan Road, 10th YouSong lndustrial District, Longhua Town, Baoan, ShenZhen 1. Level 1 Environment‐related Substances should NEVER be used. 2. Purchase ink, paint, wire rods, and molding resins only from the business partners that Sony approves as Green Partners. 3. Recycled Resin and Coated Wire should be procured from Green Partners User Manual 802.11abgn wireless module IEEE 802.11a/b/g/n 2x2 WiFi Module Project Name 802.
CONTENTS 1. REVISION HISTORY ..................................................................... 3 2 PRODUCT OVERVIEW ................................................................... 4 3 SIGNAL DESCRIPTION .................................................................. 5 3.1 SIGNAL DIAGRAM ........................................................................5 3.2 PINOUTS ...............................................................................5 3.2.1 Connector Specification ...........
1. Revision History Date 2013/5/24 Document revision 1.
! 2 Product Overview This documentation outlines the QCA9375 WiFi Module. It is 802.11a/b/g/n compatible, ARIB STD-T66 Compatible; the module Host I/F is USB 2.0. IEEE 802.11 a/b/g and 802.11n payload data rates for Wireless Local Area Network (WLAN). 1.1 Operating Frequency: 2402~2483.5MHz, 5150MHz~5250MHz, 5250MHz~5350MHz, 5470MHz~5725MHz, 5725MHz~5845MHz 1.2 Modulation: DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM 1.3 Data Rates: 1/2/5.5/11Mbps (11b) 6/9/12/18/24/36/48/54 Mbps (11g) MCS0~MCS15 1.
! 3 Signal Description 3.1 Signal Diagram Below figure 2 shows its signal diagram. Figure 2: Module Signal Diagram 3.2 Pinouts 3.2.1 Connector Specification JST WTB connector, Part Number: SM10B-GHS-TB(LF)! Pin1 3.2.2 Pin definition Pin# 1 2 3 4 Pin Name GND WoW CHIP_PWD_L GND Pin Type O I - 5 USB_DM I/O 6 7 8 9 10 USB_DP VCC_3.3V VCC_3.
4 Electrical Specification 4.1 Absolute Maximum Rating Symbol Condition Min. Typ. Max Unit VCC_3.3V Respect to GND -0.3 3.3 3.6 V CHIP_PWD_L Respect to GND -0.3 3.3 3.6 V Max Ripple on Supplied Voltage 3.3V 165 mVpp Operating Temperature -- -10 25 75 ℃ Storage Temperature -- -40 25 85 ℃ Min. Typ. Max 4.2 Recommended Operating Condition Symbol Condition Unit VCC_3.3V Respect to GND 3.14 3.3 3.46 V CHIP_PWD_L Respect to GND -0.3 3.3 3.46 V 4.
Parameter Description Min Max Unit tA tC Rise time of VDD3.3V go to 90% of 3.3V Time from VDD3.3V reaching 90% of 3.3V to level of CHIP_PWD_L going above 50% of VDD3.3V. The value is tA+tC, during this time, the level of CHIP_PWD_L should stay below 50% of VDD3.3V. ‐ 5 25 ‐ ms μs tB 4.5 WLAN RF Specifications 4.5.1 WLAN RF Specification- 802.11b Items Contents Specification Mode Channel Data rate TX Characteristics 1.
4.5.2 WLAN RF Specification- 802.11g Items Contents Specification Mode Channel Data rate TX Characteristics 1. Power Levels (per chain) 1) Target Power@6Mbps 2) Target Power@9Mbps 3) Target Power@12Mbps 4) Target Power@18Mbps 5) Target Power@24Mbps 6) Target Power@36Mbps 7) Target Power@48Mbps 8) Target Power@54Mbps 2. Spectrum Mask @ Target Power 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3.
4.5.3 WLAN RF Specification- 802.11n (2.4GHz) HT20 Items Contents Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (per chain) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @Target Power 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3.
4.5.4 WLAN RF Specification- 802.11a Items Contents Specification Mode IEEE 802.11a OFDM 5150MHz~5250MHz, 5250MHz~5350MHz, 5470MHz~5725MHz, 5725MHz~5845MHz 6, 9, 12, 18, 24, 36, 48, 54Mbps Min. Typ. Max. Unit Channel Data rate TX Characteristics 1. Power Levels (per chain) 1) Target Power@6Mbps 2) Target Power@9Mbps 3) Target Power@12Mbps 4) Target Power@18Mbps 5) Target Power@24Mbps 6) Target Power@36Mbps 7) Target Power@48Mbps 8) Target Power@54Mbps 2.
4.5.5 WLAN RF Specification- 802.11n (5GHz) HT20 Items Contents Specification Mode IEEE 802.11a/n HT20 OFDM 5150MHz~5250MHz, 5250MHz~5350MHz, 5470MHz~5725MHz, 5725MHz~5845MHz MCS0/1/2/3/4/5/6/7 Min. Typ. Max. Unit Channel Data rate (MCS index) TX Characteristics 1. Power Levels (per chain) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2.
4.5.6 WLAN RF Specification- 802.11n (5GHz) HT40 Items Contents Specification Mode IEEE 802.11a/n HT40 OFDM 5150MHz~5250MHz, 5250MHz~5350MHz, 5470MHz~5725MHz, 5725MHz~5845MHz MCS0/1/2/3/4/5/6/7 Min. Typ. Max. Unit Channel Data rate (MCS index) TX Characteristics 1. Power Levels (per chain) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2.
6 Antenna Specifications 6.1 PCB Printed Antenna Pattern Ant 0 and Ant 1 pattern are horizontal mirror Ant 0 Ant 1 6.
Antenna 0 2.
Antenna 1 2.
7 Module Mechanical Specifications Dimension (W x L x H ): 40.0mmx37.5mmx5.
8 Handling Notice ESD There are semiconductors on the module, please handle the module under ESD protected and well-controlled environment (<100V). Storage and Usage Condition 1. Moisture barrier bag must be stored under 40 ℃, humidity under 90% RH, when the moisture barrier bag is sealed by Foxconn. 2. The calculated shelf life for the dry packed product shall be a 12 months from the bag seal date. 3. If Moisture barrier bag is open, the component must be stored in an environment of <25±5℃ /10%RH 4.
9 Reliability Test Plan 23
24
10Marking Information Please refer to below for the laser marking details.
11 Packing Information 26
27
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel.
sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. For Taiwan:低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大 功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用, 並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備,限於室內使用。 1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤。 2.