User's Manual

AMBIT Microsystems Corporation
Headquarters: 5F-1, 5 Hsin-An Road, Hsinchu
Taipei Branch: 11F,100-1 Min-Chuan Road,
Science-Based Industria Park Taiwan, R.O.C.
Hsin-Tien, Taiwan, R.O.C.
TEL: [phone] TEL:[phone]
FCC Compliance
This Ambit DOCSIS Cable Modem has been tested and found to comply with the limits for a Class B personal
computer and peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation, if this unit does cause harmful interference to radio or television reception, which can be
determined by turning the unit off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or experienced radio/TV technician for help.
Subnet
A network subdivision. When subnetting is used, the IP (Internet Protocol) address is divided into a subnet number
and a host number. Hosts and gateways identify the bits used for the network and subnet number through the use
of a subnet mask.
TCP/IP communication stack
Software in the subscriber computer that processes packets through the
communication layers. The subscriber configures the IP addresses for the computer and the router default
gateway in the software. The TCP/IP communication stack handles all the communications with the subscriber's
application.