User's Manual

30 Ambit Microsystems Corporation
Configuration: Selecting this tab opens the “Configuration” menu. Here you will find options for
configuring your adapter.
Description of Settings
Following is an explanation of each adapter setting presented by the “Configuration” menu.
Mode: The Mode setting determines the architecture of your wireless LAN. Choose Ad-Hoc or
Infrastructure Mode depending on your network type. A brief explanation of each mode follows:
 Ad-Hoc: This mode is used for a simple peer-to-peer network. This type of network
allows the sharing of local resources only between wireless clients without a wireless
Access Point (AP).

Infrastructure: This mode allows a wireless LAN to be integrated into an existing wired
network through an AP. Infrastructure type networks also permit roaming between Access
Points while maintaining connection to all network resources. Infrastructure mode
provides additional features, such as WEP security, power saving and extended range.
SSID: An acronym for Service Set Identifier, SSID is the unique name shared among all clients and
Access Points in a wireless network. The SSID must be identical for all clients or Access Points
participating in the same network. The SSID is case sensitive and must not exceed 30 characters.
Ethernet Conversion: The RFC1042 mode is the 802.11 standard conversion method and is
selected by default. If compatibility with older wireless LAN systems is necessary select another
conversion implementation from the Ethernet Conversion drop down list.
Tx Rate: The transmit rate or Tx Rate selects the allowable transfer rates of the wireless client. To
optimize performance and range, the Tx Rate should be set to Fully Automatic, which will