User's Manual
Table Of Contents
- Using the Setup screen
- Viewing images on a TV
- Using your computer
- Enjoying your Windows computer
- Installing the software (supplied)
- On the “Picture Motion Browser” (supplied)
- Copying images to your computer using the “Picture Motion Browser”
- Copying images to a computer without “Picture Motion Browser”
- Viewing image files stored on a computer with the camera copying to the “Memory Stick Duo”
- Using your Macintosh computer
- Viewing “Cyber-shot Step-up Guide”
- Printing still images
- Troubleshooting
- Others
- Index
56
For details on the operation 1 page 48
Setup2
2
The default settings are marked with .
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the dedicated USB cable.
Sets the video signal output according to the TV color system of the connected video
equipment. Different countries and regions use different TV color systems. If you want to
view images on a TV screen, check page 59 for the TV color system of the country or region
where the camera is used.
USB Connect
PictBridge
Connects the camera to a PictBridge compliant printer
(page 76).
PTP
When [PTP] (Picture Transfer Protocol) is set and the camera
is connected to a computer, the images in the recording folder
on the camera are copied to the computer (Compatible with
Windows XP and Mac OS X).
Mass Storage
Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 65).
Video Out
NTSC
Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
PAL
Sets the video output signal to PAL mode (e.g., for Europe).
FileNumberの項目削除致しました