User's Manual
Table Of Contents
- Using the Setup screen
- Viewing images on a TV
- Using your computer
- Enjoying your Windows computer
- Installing the software (supplied)
- On the “Picture Motion Browser” (supplied)
- Copying images to your computer using the “Picture Motion Browser”
- Copying images to a computer without “Picture Motion Browser”
- Viewing image files stored on a computer with the camera copying to the “Memory Stick Duo”
- Using your Macintosh computer
- Viewing “Cyber-shot Step-up Guide”
- Printing still images
- Troubleshooting
- Others
- Index
58
Viewing images on a TV
Viewing images on a TV
You can view images on a TV by connecting the camera to a TV.
The connection varies according to the type of TV the camera is connected to.
Turn off both the camera and the TV before connecting the camera to the TV.
1 Connect the camera to the TV with the dedicated A/V cable (supplied).
• If your TV has stereo input jacks, connect the audio plug (black) of the dedicated A/V cable to the left
audio jack.
2 Turn on the TV and set the input.
• Refer also to the operating instructions supplied with the TV.
3 Press (Playback) to turn on the camera.
Images shot with the camera appear on the TV.
Press b/B on the control button to select the desired image.
• When using your camera abroad, it may be necessary to switch the video signal output to match that
of your TV system (page 56).
Viewing images by connecting the camera to a TV with the supplied
dedicated A/V cable.
1 To audio/video
input jacks
Dedicated A/V cable
2 To the (USB) ·
A/V OUT terminal
Yellow Black
VIDEO AUDIO
(Playback) button (back)
H3に合わせて文言、イラスト、レイ
アウトを修正致しました。ご確認く
ださい。
イラスト修正しております。再生
ボタンがLCD側にあるため後ろか
ら引出し線を引いております。
カメラの「コントロールボタン」
もLCD側にありますが、引出し線
と文言は必要でしょうか?
ご確認のうえ、ご指示頂ければ幸
いに存じます。