User's Manual

Using the Setup screen

Memory Stick Tool For details on the operation 1 page 46

Copies all images in the internal memory to a “Memory Stick Duo”.

1 Insert a “Memory Stick Duo” having 64 MB or larger capacity.

2 Select [OK] with v on the control button, then press z.

The message “All data in internal memory will be copied Ready?” appears.

3 Select [OK] with v, then press z.

Copying starts.

To cancel the copying

Select [Cancel] in step 2 or 3, then press z.

• Use fully charged Nickel-Metal Hydride batteries or the AC Adaptor (not supplied). If you attempt to

copy image files using batteries with little remaining charge, the batteries may run out, causing copying to

fail or possibly corrupting the data.

• You cannot copy individual images.

• The original images in the internal memory are retained even after copying. To delete the contents of the

internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in

(Internal Memory Tool) (page 50).

• When you copy the data in the internal Memory to the “Memory Stick Duo”, all the data will be copied.

You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be

copied.

• Even if you copy data, a (Print order) mark is not copied.

Copy

64MBに変更致しました。

ニッケル水素電池の文言に変更致しました。